Transmission oil additive for mechanical gearbox Atomium MGSB for manual transmission / DSG robot, for restoration, reduction of hum and vibrations, 100ml

Atomium MGSB transmission oil additive for mechanical gear box should be added to transmission oil in a gear box or a reducer through the standard oil filling hole of the unit.

The following procedure should be followed:

• Before applying Atomium MGSB - shake the can thoroughly until natural sediments (active components) are totally dissolved. Sediments are actually active component.
• Warm-up the gear box to the normal working temperature, then shut off the engine,
• Pour Atomium MGSB through the regular oil filling neck.
• After applying make a drive on the car during no less than 20 min in a usual driving mode.
• In case if a replacement of transmission oil is planned – add the compound to the fresh oil.

Important:

• It is not recommended to apply the lubricant in case of mechanical breakages of parts and assemblies;
• Atomium MGSB is compatible to any type of transmission fluid and doesn't change its properties;
• Precautions: Not harmful if applied correctly.

First aid:

• In case of a contact with skin remove the material wash out with warm water, and then wash again with soap;
• In case of contact with eyes wash out eyes with large amount of water;
• In case of swallowing consult a doctor.

There are various transmission oil additives. They are not the same from the point of view of technology used. Below we will try to answer shortly on most frequent questions about them.

What is the best transmission oil additive?

It would be nice to have a straight answer on this question. However various additives have different purposes and resolve different problems. Some of them change oil properties such as viscosity for example. Others aimed to prevent oil leaks from the gear housing. Additives similar to Atomium compound restore worn surfaces and slow down further wear. When choosing an additive tfor your car - read the description of the product thoroughly and pay attention to technology and operating principle.

Do transmission oil additives work?

Obviously different additives work with different efficiency. Looking for an additive to fix problems with your transmission – pay attention to a few things. How long the product is on the market? Are there convincing public reviews in the net? Is technology clearly explained or you can find only marketing ads?

As for Atomium compound – it works since 2002. There are few millions transmissions treated. And there were no any serious claims. Technology is described in the main product description.

How to reduce transmission noise?

First of all – we are speaking about working transmission. It means that there are no any broken parts. If so there be may just one reason for annoying noise when transmission is working – worn friction surfaces. In this case friction clearances are widened and instead of smooth engagement gears are hitting each other. Thousands of small hits create permanent noise which is getting lauder when speed grows. Aside of unpleasant sound and irritating vibration all these hits are also “eating” energy which leads to increased fuel consumption.

When you know the сause of the problem it is easy to find a solution – worn surface should be restored. It is exactly what Atomium compound does, see the description.