• sale!
  • Atomium MAX 200 MGSB - 2016
The Atomium MAX 200 MGSB is designed for mechanical and reduction gears, rear axles and self-locking differentials


Lubricant Composition Atomium Max MGSB   is designed for the treatment of mechanical gear boxes, rear axles, reduction gears of any type and self-locking differentials. 
The treatment to be made in one stage.

Mode of application: add  to the transmission oil

Precautions: Not harmful if applied correctly.

First aid:

  • In case of a contact with skin remove the material wash out with warm water, and then wash again with soap.
  • In case of contact with eyes wash out eyes with large amount of water.
  • In case of swallowing consult a doctor.


Add Lubricant Composition Atomium  MAX  MGSB to the working oil in the unit at the rate of 10-15 ml of the Lubricant per 1 liter of transmission oil. 
After applying Atomium MAX MGSB drive the car in a regular mode for no less than 20 minutes. Run till the next regular oil replacement (but no less than 2000 km).

Important notes:

  • Before applying ATOMIUM MAX MGSB shake the can thoroughly until natural sediments (active components) are totally dissolved.
  • Apply ATOMIUM MAX  MGSB through the regular filling neck of the warmed-up unit.
  • After applying ATOMIUM MAX  MGSB drive the car for no less than 20 minutes in any mode (regular operation).
  • It is recommended to carry out Atomium treatment of mechanical transmissions together with engine processing at the same time or sequentially.
  • It is not recommended to apply the lubricant at existence of mechanical breakages of parts and assemblies.
  • ATOMIUM MAX   MGSB is compatible to any type of transmission oils and doesn't change their properties (apart from ATF Synthetic Automatic Transmission Fluid).
  • To provide continuous level of protection of the unit it is recommended to apply LC further after each oil change (every 50 000 – 70 000 km).


  • Improves the process of burnishing the unit parts, including condition after overhaul (because of the adaptive properties of the LC, that work on optimization of conjugated friction parts);
  • Increases the unit lifetime in 1,5-2 times (due to wear intensity decreasing);
  • Decreases friction losses in unit details (as a result of improvement of the friction mode);
  • Provides maximum protection of the unit against wear in case of overloading or overheating under high temperature of the environment;
  • Doesn't worsen operational characteristics of rubber parts;
  • Significantly reduces noise and vibration levels in gearbox, rear axle (due to forming of thick and resistant lubrication “pillow” and clearances optimization);
  • Restores optimum spacings in bearings and serrated gearings;
  • Restores the ease of gearshift due to the recovery of gaps and reduce of friction losses;
  • Provides possibility of short-time run under oil starvation conditions in the unit.

Atomium MAX 200 MGSB - 2016

  • Product Code: MAX
  • Availability: In Stock
  • 1,836Kč
  • 1,010Kč

  • Ex Tax: 835Kč

Related Products

Atomium MAX 200 Engine - 2016

Atomium MAX 200 Engine - 2016

Atomium MAX 200 Engine is designed for diesel, gasoline, LPG and CNG gas engines with a cylinder capacity of 8 liters. ..

1,157Kč 2,104Kč Ex Tax: 956Kč

Atomium MAX 200 HPFP - 2016

Atomium MAX 200 HPFP - 2016

Atomium MAX 200 HPFP is designed for high-pressure fuel pumps, Common Rail systems and injectors of any construction ..

976Kč 1,774Kč Ex Tax: 806Kč

Atomium MAX 200 Hydraulic - 2016

Atomium MAX 200 Hydraulic - 2016

Atomium MAX 200 Hydraulic is designed for hydraulic propulsion machinery, tools and heavy duty machinery ..

1,010Kč 1,836Kč Ex Tax: 835Kč