Office:
Hotline (24/7):
Mo - Fr : 9:30 - 17:00 St - Su : closed
Technical customer support +420 601 124 211

Atomium Active Diesel Plus x 2 + Atomium Aprohim™ Engine Flush 200

  • Atomium Active Diesel Plus x 2 + Atomium Aprohim™ Engine Flush 200
  • Product Code: Engine
  • Availability: In Stock
  • Oil additive to restore performance of diesel engines with mileage more than 50.000 kilometers. Increases compression, power, acceleration, reduces fuel consumption. It also lowers wear speed and extends the engine lifetime and protects engine from breakdowns in emergency situations.
    Suitable for all engine types and designs, including turbocharged ones. It doesn’t change oil properties and acts only on metallic surfaces.

    Long-term flushing ATOMIUM APROHIM ENGINE FLUSH 200 km -  is designed to clean the internal surfaces of the engine from long-standing deposits, removes blacksludge and other contaminants and deposits. Flushing belongs to the class of "soft" cleaners, which require a certain time of action. This is why flushing must be added to the oil system approximately 200 kilometres before the planned oil change. This mileage and, consequently, engine hours will be sufficient for effective, but at the same time gradual, safe cleaning. Engine flush - consistently dissolves contamination by the incoming flow of oil, does not allow the formation of lumps and clots suspended in the oil. 

  • 68.96€

  • Ex Tax: 56.99€





To restore worn details the active mineral should be present in the motor oil for a long time. The huge practice of compound application shows that best results may ba achieved with multistage treatment.

1st stage: Add Atomium Active Diesel Plus additive to the engine oil 500-1000 km before oil replacement. Follow next steps:

  • Before applying Atomium Active Diesel Plus shake the can thoroughly until natural sediments  are totally dissolved. Sediments are actually active component.

  • Warm-up the engine to the normal working temperature, then shut off the engine.

  • Pour  Atomium Active Diesel Plus through the regular oil filling neck.

  • After applying Atomium Active Diesel Plus make a drive on the car during no less than 20 min in a usual driving mode

In case if there are more than 1000 kilometers till regular oil change it is reasonable to make regular oil checks every 500-700 kilometres. In case of a significant oil contamination (identify by the color of the oil on the dipstick or oil spots on filter paper) start the second stage of treatment immediately. 


2nd stage: Change oil. Replace oil and air filter. Add Atomium Active Diesel Plus to the new engine oil according the procedure decribed above.

Use car in a regular mode till the next scheduled oil replacement. No additional oil checks required,


3rd stage (for heavily worn engines): Change oil. Replace oil and air filter. Add Atomium Active Diesel Plus to the new engine oil.


All stages are shown on the table below:


Treatment stages

                Oil volume in the oil pan

From 2 to 7 ltrs

From 7 to 10 ltrs

1st stage

1 can

2 cans


  About 1000 km of mileage till the oil         replacement.


Change oil and oil filter

2nd stage

1 can

2 cans


Run the car in regular mode till the oil replacement.


Change oil and oil filter

3rd stage

1 can

2 cans




Important:

  • It is not recommended to apply the lubricant at existence of mechanical breakages of parts and assemblies.

  • Atomium Active Diesel Plus is compatible to any type of engine oils and doesn't change their properties.

  • For providing continuous level of engine protection it is recommended to apply Atomium Regular 30 000 - 40 000 km after complete treatment with Atomium Active Diesel Plus.

  • After 100 000 km complete  re- treatment is recommended.

  • To achieve the full level of protection the treatment of all vehicle parts is recommended, such as transmission gears, hydraulic power steering etc.

Precautions: Not harmful if applied correctly.

First aid:

  • In case of a contact with skin remove the material wash out with warm water, and then wash again with soap.

  • In case of contact with eyes wash out eyes with large amount of water.

  • In case of swallowing consult a doctor.


 



PRECAUTIONARY MEASURES:

  • Flushing agent according to the parameters of acute toxicity according to GOST 12.1007 belongs to the third hazard class (moderately dangerous substances). The product has a moderate irritating effect on the skin and mucous membranes of the eyes. Volatile components cause moderate irritation of the mucous membranes of the eyes and upper respiratory tract.

  • Use only for the intended purpose.

  • Do not disassemble or give to children.

  • Avoid contact with the eyes and inside of the human body.

  • Work in a well-ventilated area. Use personal protective equipment for the skin.

  • If skin contact occurs, remove contaminated clothing. Wash the exposed area of the body surface with a stream of water, and then with soap and water. In case of contact with eyes, rinse with plenty of water. In case of contact with the digestive system, consult a doctor.

Notes:

  • Store in a place protected from moisture and direct sunlight at a temperature from -20 ᵒC to +50 ᵒC.

  • Compatible with all types of engine oils.

  • It is safe for engines of any design, including turbocharged ones.

  • Evaporates during operation. It does not affect the properties of the lubricating oil.

  • Safe for rubber seals, oil seals, oil caps;

  • It does not clog the channels of the oil system and is not deposited on the walls of the internal combustion engine elements.


Manual:

  • Warm up the engine to operating temperature.

  • Stir the contents of the jar, shaking it for 1-2 minutes.

  • Pour 1 can of flushing into the oil filler neck. If the volume of the oil system is more than 6 litres, it is necessary to fill 2 cans of product.

  • Make the trip by car within 20-25 minutes.

  • Replace the oil and oil filter 200 kilometres after applying the product.

ATTENTION! IN THE EVENT OF SIGNIFICANT OIL CONTAMINATION DURING CLEANING OR A SHARP DROP IN OIL PRESSURE (OIL PRESSURE LAMP FLASHING), IMMEDIATELY REPLACE THE OIL AND OIL FILTER.


Output:

Long-term flushing of the engine

TU 2384-006-79761558-2014

Storage conditions from -20 ᵒC to +50 ᵒC

Shelf life 5 years

The date of manufacture is indicated on the label.

There are many frequently asked questions about engine oil additives. People are looking for additives to fix certain problem: oil burning or knocking sound, worry if any oil additive work at all or if they are safe for the engine. Below we will try to clarify some frequent cases specific for diesel engines.


DO ANY OIL ADDITIVE WORK?

It is a very good question. We can’t say for all the types of additives, because there are a row of very different technologies used. There are ceramics based products, ones using heavy chemical components, soft metal additives and others. It is hard to decide which one is best as each of them has its own pro and contra.

Atomium tribotechnical compounds are using special ability of nature minerals mined from the depth of 150-200 meters from under the ground. These minerals activate electrons in the friction surfaces and let them catch small metallic particles from the motor oil. It builds up a special protective layer which brings up many positive changes in the engine work.

Does it work? Answer – yes, because tribotechnical compounds are being sold and used since 2002 up to 5 millions engines are treated with no complaints.


CAN OIL ADDITIVE RESTORE MY ENGINE?

That is exactly what tribotechnical compound does. Thanks to protective metallic layer (see explanations above) engine parts are able to get back their original size and shape. It let them work as if they were new just from the conveyer. Right shape of friction surface means that there are optimal friction clearances between them which is important for proper work of the whole system. This is how engine performance is restored.

Particularly the engine treatment with Atomium oil additive of diesel engine brings up following noticeable effects:

Engine noise. Right clearances provide equal compression in cylinders which gives a well balance at each cycle. Engine work becomes “soft” and quiet. Proper clearances also reduces vibrations of parts and micro hits which allows to stop knocking or ticking sound.

Oil burning. Right clearances provide proper work of oil scraper rings. Oil is effectively removed from cylinders and doesn’t get in combustion chamber. As result it doesn’t burn out and you do not need to add oil during interservice period.

Another point are oil leaks. If you see oil spots on the ground under your car – it means that there is a seal in the engine body or some oil seals and gaskets are disrupted. These parts have no relation to friction and therefore tribocompound can’t help.


HOW TO MAKE DIESEL ENGINE START EASIER?

Protective layer created by tribotechnical compound on the cylinder surfaces is able to keep oil for a long time even when engine is off. It makes much easier for the starter to make first piston movements at the engine starts. It is especially important for diesel engines at cold weather. It also sufficiently reduces the wear caused by dry friction and let your engine to work longer.


HOW TO EXTEND LIFETIME OF DEISEL TURBIN?

What may be relation between an oil additive and an engine turbine? Atomium compound restores friction clearances. This prevents oil breaks into combustion chamber and restores compression. After all it provides better fuel combustion and less amount of dirt and soot in the exhaust. Dirt and soot is deadly destructive for turbines as it changes weight balance of turbine blades. The cleaner they are – the longer turbine serves.

Additionally optimal friction clearances blocks breaks of exhaust gases to the oil. It prevents oil detergent properties, its density and other characteristics. Needless to say it seriously extend lifetime of the whole engine.


Many car manufacturers recommend cleaning the engine before changing theoil. The fact is that in the process of working, the oil collects various pollutants - slags, carbon deposits, oxides. Some of them fall into deposits in the oil channel sand other parts of the system and can no longer be dissolved by conventional detergents in the oil, since they are almost used up.

When replacing the oil, however, the washing properties of the new oil are quite high and contamination partially re-enter it, drastically reducing the service life and reducing its working properties. Especially highly necessary to wash the system when switching from mineral oil varieties to synthetic ones, whose washing properties are much higher.

Pre-washing the motor becomes, therefore, an important factor in maintaining its operability. Atomium engine flushing product is universal, suitable for petrol and diesel engines. It is "soft", the washing period is 200 kilometres before the planned oil change, without destroying rubber products, without affecting the fuel combustion modes, it is safe for injectors and other components.

However, it is not recommended to exceed the 200-kilometer run very much, since the washed dirt is collected in the oil, which reduces its characteristics.

Proper maintenance of the engine is a good way to avoid unexpected problems. If you still have any questions about the use of flushing, please contact the consultants of the online store or look at the reviews ofother customers.

Oil additive to restore performance parameters characteristics of diesel engines with mileage more than 50.000 kilometers.


By restoring weared friction surfaces the compound increases compression, power, acceleration, reduces fuel consumption. It also lowers wear speed and extends the engine lifetime and protects engine from breakdowns in emergency situations.


Suitable for all engine types and designs, including turbocharged ones. It doesn’t change oil properties and acts only on metallic surfaces.

Getting into the zones of local contacts of friction surfaces with a temperature of more than 1000 degrees and high pressure the mineral particles activate electronic connections in the metal. It allows the surface to capture the metal from the engine oil, which is there as a result of engine wear. Gradually, a special protective layer is formed on the entire friction surface. It is harder than a original surface and can hold denser oil film due to its porous structure.

Tribotechnical compound Atomium Active Plus Diesel contains a selection of minerals that is most effective for temperatures and loads of diesel engines.The concentration of the active component allows you to restore engines with significant wear. Thus Atomium additive is intended for diesel engines with a mileage of more than 50,000 kilometres with an oil system volume of up to 7 litres.

The protective layer on the friction surfaces restores the geometry of the parts, better retains a dense film of oil, which facilitates the operation of the engine and returns its nominal performance parameters.


Effects of application

  • Cleans up friction surfaces from lacquers and deposits, including de-coking of the piston rings;
  • Increases and levels compression in the cylinders (due to the formation of a new layer and sealing gaps in friction units);
  • Restores oil pressure in the engine oil system up to rated one;
  • Decreases oil burning;
  • Increases of the engine life by 1.5 - 2 times due to wear intensity decreasing;
  • Increases engine effective power as a result of efective fuel combustion, decreasing exhaust gases breakthrough to crankcase;
  • Reduces oil waste consumption in the engine up to 3 times due to the sealing piston rings;
  • Provides maximum engine protection in extreme working conditions, also in case of overloading or overheating and during «cold start-up»;
  • Makes start at low temperatures much easier;
  • Does not degrade operational characteristics of rubber parts;
  • Decreases fuel consumption of internal combustion engine to 8 - 10 % as a result of compression recovering;
  • Significantly  decreases noise and vibration levels by 5 - 10 dB due to forming of thick and resistant lubrication “pillow” on friction surfaces;
  • Decreases exhaust CO/CH emissions up to 50 % as a result of improvement of combustion quality;
  • Provides possibility of short-time run under oil starvation conditions or when oil  is completely lost
  • Restores the work of valve lifters or hydraulic tappets;

Due to the fact that tribotechnical compounds Atomium does not contain any aggressive chemical components – it makes our products safe. It does not affect any properties of engine oil, does not artificially change engine operating modes, does not affect the condition of rubber parts-seals, seals, and so on.


Long-term flushing ATOMIUM APROHIM  ENGINE FLUSH 200 km is designed to clean the internal surfaces of the engine from long-standing deposits, removes black sludge and other contaminants and deposits. Flushing belongs to the class of "soft" cleaners, which require a certain time of action. This is why flushing must be added to the oil system approximately 200 kilometres before the planned oil change. This mileage and, consequently, engine hours will be sufficient for effective, but at the same time gradual, safe cleaning. Engine flush - consistently dissolves contamination by the incoming flow of oil, does not allow the formation of lumps and clots suspended in the oil.


EFFECTS OF APPLICATION

Washing composition ATOMIUM APROHIM ENGINE FLUSH 200 km - gently dissolves deposits and dirt in various components and mechanisms of the engine, formed during overheating and poor combustion of fuel, does not allow them to settle again in the oil channels, allows you to remove dirt when draining the oil. This allows you to:

  • Facilitate engine operation,
  • Effectively clean the oil system when switching from one type of oil to another,
  • Extend the life of the new oil, which means better protection of the engine from wear,
  • Restore the mobility and fit of compression and oil removal rings, which means to increase and equalize the compression in the cylinders, ensure uniform operation, high-quality fuel combustion,
  • Restore the mobility of the hydraulic compensator plungers, which eliminates the characteristic knocking when starting the engine,
  • Restore operation of the PCV valve.

    Recommended for continuous use before each oil change.

    Long-term flushing ATOMIUM APROHIM™ ENGINE FLUSH 200 km - does not affect rubber and composite parts, such as seals and gaskets.

    Investigated and tested for functional compliance with the technical parameters of Russian cars and oils.

    Write a review

    Note: HTML is not translated!
        Bad           Good