Additive in engine oil for diesel engine Atomium Active Diesel Plus (> 50,000 km) to restore compression, power and eliminate oil consumption, 3 x 90ml + (as a gift) Atomium Active Regular

Oil additive "Active Plus Diesel” is designed to restore performance and protect against wear of diesel engines of passenger cars with a mileage of more than 50,000 kilometres. It can be used for accelerated and turbocharged engines.

Precautionary measures:

    Does not pose a health hazard under normal conditions of use.
    In case of skin contact, wash the exposed area with warm water and then with soap and water.
    In case of contact with eyes, rinse them with plenty of water.
    In case of contact with the digestive system, consult a doctor.

Notes:

    The shelf life is 5 years. The date of manufacture is indicated on the bottle.
    It is not recommended for use in mechanical failures of parts and assemblies.
    Active Plus is compatible with all types of engine oils.
    The sediment at the bottom of the bottle is the main working element of the "Active Plus" compound - microparticles of minerals. It is extremely important to thoroughly mix the contents of the bottle before pouring it into the engine oil system. (The colour of the sediment may vary from light green to dark grey and black depending on the production batch).
    Overdose when applying the composition of 1.5 times is not dangerous for the engine and does not disrupt its operation.
    The composition of "Active Plus" does not affect the characteristics and condition of parts made of composite materials, ceramics and rubber products.

Treatment of the engine with additive "Active Plus" is performed in three stages. At each stage it is necessary to add the compound to the engine oil according to the following procedure:

    Warm up the engine to operating temperature (normal operation).
    Turn off the engine.
    Carefully mix the contents of the bottle so that the sediment at the bottom is distributed throughout the entire volume of the liquid.
    Pour 1 bottle of the compound into the oil filler neck of the engine. (If the volume of the oil system is more than 7 litres, it is necessary to fill two bottles of the composition).
    Immediately after adding the compound, make a trip by car for 20-25 minutes in norm
    al operation.

After the application of the compound, the car can be used as usual.

Complete treatment of the engine is performed according to the following scheme:

Oil volume in the oil pan
Stage	From 2 to 7 ltrs	From 7 to 10 ltrs
1 stage	In engine oil is added:
	1 can	2 cans
	About 1000 km of mileage till the oil replacement.
	Changing the oil and oil filter *
2 stage	In new oil is added:
	1 can	2 cans
	Run the car in regular mode till the oil replacement.
	Changing the oil and oil filter
3 stage	In new oil is added:
	1 can	2 cans
Regular operation

If the mileage before the regular oil change is more than 1000 km, it is necessary to conduct a drip oil test every 500-1000 km. If the oil has become densely black, it is necessary to make its early replacement and go to the second stage.

Recommendations:

    After full treatment with Active Plus, it is recommended to use Active Regular for each regular oil change to maintain the engine performance and protection level;
    To maintain engine performance we recommend to use multi-function cleaning additive to the diesel fuel ATOMIUM "SDA";
    To restore the transmission resource, it is recommended to use tribotechnical compound ATOMIUM "MGSB", "AGSB", "REDUCER»;
    To restore the characteristics of the power steering system, we recommend the compound ATOMIUM  "HPS";
    To restore high-pressure fuel pumps, we recommend the compound of ATOMIUM "HPFP".

Do any oil additive work?

It is a very good question. We can’t say for all the types of additives, because there are a row of very different technologies used. There are ceramics based products, ones using heavy chemical components, soft metal additives and others. It is hard to decide which one is best as each of them has its own pro and contra.

• Engine noise. Right clearances provide equal compression in cylinders which gives a well balance at each cycle. Engine work becomes “soft” and quiet. Proper clearances also reduces vibrations of parts and micro hits which allows to stop knocking or ticking sound.
• Oil burning. Right clearances provide proper work of oil scraper rings. Oil is effectively removed from cylinders and doesn’t get in combustion chamber. As result it doesn’t burn out and you do not need to add oil during interservice period.
• Another point are oil leaks. If you see oil spots on the ground under your car – it means that there is a seal in the engine body or some oil seals and gaskets are disrupted. These parts have no relation to friction and therefore tribocompound can’t help.

Atomium tribotechnical compounds are using special ability of nature minerals mined from the depth of 150-200 meters from under the ground. These minerals activate electrons in the friction surfaces and let them catch small metallic particles from the motor oil. It builds up a special protective layer which brings up many positive changes in the engine work.

Does it work? Answer – yes, because tribotechnical compounds  Atomium are being sold and used since 2002 up to 5 millions engines are treated with no complaints.

Can oil additive restore my engine?

That is exactly what tribotechnical compound does. Thanks to protective metallic layer (see explanations above) engine parts are able to get back their original size and shape. It let them work as if they were new just from the conveyer. Right shape of friction surface means that there are optimal friction clearances between them which is important for proper work of the whole system. This is how engine performance is restored.

How to make engine start easier?

Protective layer created by tribotechnical compound Atomium on the cylinder surfaces is able to keep oil for a long time even when engine is off. It makes much easier for the starter to make first piston movements at the engine starts. It is especially important for diesel engines at cold weather. It also sufficiently reduces the wear caused by dry friction and let your engine to work longer.

How to extend lifetime of diesel turbin?

What may be relation between an oil additive and an engine turbine? Atomium compound restores friction clearances. This prevents oil breaks into combustion chamber and restores compression. After all it provides better fuel combustion and less amount of dirt and soot in the exhaust. Dirt and soot is deadly destructive for turbines as it changes weight balance of turbine blades. The cleaner they are – the longer turbine serves.

Additionally optimal friction clearances blocks breaks of exhaust gases to the oil. It prevents oil detergent properties, its density and other characteristics. Needless to say it seriously extend lifetime of the whole engine.